With over 400 pages, 200 new products and a 60 page Technical Reference section, this is the industry leader.
Loaded with new products, tips and tricks, and informative technical information, subscribe now!
On some blasting projects you have to move your spent abrasive from "A" all the way to "B". From ships hulls from inside tanks or from bridge containments, sometimes you just can’t use a wheelbarrow and shovel.
These projects call for an efficient vacuum system that can suck up spent used abrasives and collect it at a central point ready for recycling or disposal. The Vacuload™ systems have been specially designed for blasting sites and for handling abrasive. The series 2 and 4 models are powered by compressed air which saves you the cost of another expensive motor [when you have finished blasting simply switch your compressed air lines from your Blast machines to your Vacuload™ system and you’re in Recovery mode].
The vacuum is generated by a specially designed, air powered Eductor pump that is inexpensive, efficient and requires almost no maintenance. The larger series 5 and 6 Vacuload™ models generate vacuum using a Trilobe Positive Displacement Blower which is powered by a diesel engine or large electric motor. These units are suitable for projects where surplus compressed air is not available.
The Vacuload™ module is a compact skid mounted unit which combines the vacuum generating source with a high efficiency dust collector. This ensures that all dusty and contaminated air from vacuuming is fi ltered and only cleaned air exits to atmosphere. A complete vacuum recovery system is made by combining a Vacuload™ Module with a suitably sized Interceptor Storage Unit and the pick up tool to suit your application. See below.
|Model||Compressed Air Required @ 120 psi||Electrical Power Required||Dust Collector Size||Filtration Area||Automatic Reverse Pulse Cleaning||Conveying Capacity GMA Garnet*||Height||Length||Width|
|Series 1 Air powered||150 - 275||Not required||1||226||Included||**||2000||1230||730|
|Series 2 Air powered||350||Not required||2||452||Included||4||2000||1230||1180|
|Series 4 Air powered||750||Not required||4||904||Included||8||2950||1860||1250|
|Series 5 Electric powered||30||100||8||1800||Included||12||3000||6020||2400|
|Series 6 Diesel powered||30||Not required||8||1800||Included||12||3000||6020||2400|
* Conveying Capacity is subject to Inlet Compressed Air pressure, temp, abrasive density and size, length and size of vacuum hose. These rates are indicative only based on using 15 metres of vacuum hose.
** Series 1 model recommended as a high efficiency vacuum source for vacuum shrouded power tools.
|Size||Garnet Storage Capacity||Height||Length||Width|
All Vacuload™ System models work using the same operating principle.