Visit Blast-One International United States.

1800 882 229

Specialist suppliers to
the Blast Cleaning &
Coating Industry

Vacuload™ Vacuum Recovery Systems
Description

Vacuload™ Recovery Systems

For fast recovery of used Abrasives

On some blasting projects you have to move your spent abrasive from "A" all the way to "B". From ships hulls from inside tanks or from bridge containments, sometimes you just can’t use a wheelbarrow and shovel.

These projects call for an efficient vacuum system that can suck up spent used abrasives and collect it at a central point ready for recycling or disposal. The Vacuload™ systems have been specially designed for blasting sites and for handling abrasive. The series 2 and 4 models are powered by compressed air which saves you the cost of another expensive motor [when you have finished blasting simply switch your compressed air lines from your Blast machines to your Vacuload™ system and you’re in Recovery mode].

The vacuum is generated by a specially designed, air powered Eductor pump that is inexpensive, efficient and requires almost no maintenance. The larger series 5 and 6 Vacuload™ models generate vacuum using a Trilobe Positive Displacement Blower which is powered by a diesel engine or large electric motor. These units are suitable for projects where surplus compressed air is not available.

The Vacuload™ module is a compact skid mounted unit which combines the vacuum generating source with a high efficiency dust collector. This ensures that all dusty and contaminated air from vacuuming is fi ltered and only cleaned air exits to atmosphere. A complete vacuum recovery system is made by combining a Vacuload™ Module with a suitably sized Interceptor Storage Unit and the pick up tool to suit your application. See below.

Vacuload Recovery Systems

Vacuload™ System Specifications

ModelCompressed Air Required @ 120 psiElectrical Power RequiredDust Collector SizeFiltration AreaAutomatic Reverse Pulse CleaningConveying Capacity GMA Garnet*HeightLengthWidth
cfmampscartridgessq fttonne/hrmmmmmm
Series 1 Air powered150 - 275Not required1226Included**20001230730
Series 2 Air powered350Not required2452Included4200012301180
Series 4 Air powered750Not required4904Included8295018601250
Series 5 Electric powered3010081800Included12300060202400
Series 6 Diesel powered30Not required81800Included12300060202400

* Conveying Capacity is subject to Inlet Compressed Air pressure, temp, abrasive density and size, length and size of vacuum hose. These rates are indicative only based on using 15 metres of vacuum hose.

** Series 1 model recommended as a high efficiency vacuum source for vacuum shrouded power tools.

Interceptor Options

SizeGarnet Storage CapacityHeightLengthWidth
cu ftkgmmmmmm
201200299511001450
553800365015001600
1006500393019001900
Series 2 Vacuload

How do the Vacuload Recovery Systems work?

All Vacuload™ System models work using the same operating principle.

  1. The operator sucks up spent abrasive and the abrasive and air mixture travels along the vacuum hose or pipe to the Interceptor Storage Module.
  2. The Interceptor slows the air/abrasive mixture down such that all particles and heavy dusts drop out of the air stream and are stored for recycling or disposal. Light dusts remain entrained in the air stream and carry along a hose to the Vacuload™ Module.
  3. At the Vacuload™ Module all dusts are removed by final filtration cartridges in the dust collector [the cake of dust which builds up on the cartridges is dislodged by an automatic reverse pulse and is collected in a hopper awaiting disposal]. Clean air carries on through to the vacuum pump from which it is discharged to atmosphere.
Vacuload Recovery Systems

Vacuum Accessory options

Vacuum Accessory options

Site Quick Links